AlSi10Mg powder
Lightweight aluminum powder for housings, brackets, thermal structures, and transportation hardware.
- Related designations
- AlSi10Mg, Aluminum-silicon-magnesium
- Candidate PSD
- 20–63 µm / 15–53 µm / 45–106 µm
- Process routes
- LPBF
Material family
Aluminum Powder for Additive Manufacturing
AlSi10Mg powder selection guidance for lightweight housings, UAV structures, motor mounts, and electronics frames.
Specifications & quotation
Compare aluminum powder grades
Choose a grade to review chemistry, candidate particle sizes and process fit, or send a powder-specific RFQ. Final specifications and availability are confirmed with the quotation.
Buyer decision framework
Build the aluminum powder specification around the LPBF route
AlSi10Mg is the main commercial route in this catalog, but the grade name is only the starting point. A useful RFQ connects the powder lot to the machine, geometry, final thermal condition, inspection, and actual duty of the lightweight part.
Confirm AlSi10Mg is the right alloy family
Use it where low mass, LPBF process maturity, castable geometry, and practical strength matter. Compare copper for conductivity-led parts and another alloy family for high-wear or sustained hot-side duty.
Define powder-to-machine compatibility
State the referenced chemistry, atomization route, lot, PSD result and method, morphology, density, flow or spreadability evidence, contamination controls, packaging, and the intended machine or laser family.
Specify the final material condition
Identify stress relief or heat treatment, orientation, support and powder removal, machining, surface finishing, density or defect method, dimensional inspection, and the condition behind mechanical or thermal values.
Match evidence to the component function
A housing, bracket, UAV frame, motor mount, and electronics enclosure can share the powder route while requiring different vibration, fatigue, sealing, thermal, corrosion, grounding, and interface evidence.
The quotation should therefore identify one AlSi10Mg lot and one intended LPBF route, then list the documents, finished-part tests, quantity, packaging, destination, and change-control requirements needed for approval.
Technical guides supporting aluminum powder selection
AlSi10Mg Powder for LPBF: Aluminum Powder Data Sheet and Specification
AlSi10Mg aluminum powder for LPBF with typical data sheet chemistry, PSD cuts and test-bar properties. Learn how to read the TDS, COA and SDS and what to send for a quote.
AlSi10Mg Powder for Lightweight Housings and Brackets
Why AlSi10Mg powder is a practical LPBF route for lightweight housings, brackets, covers, and aluminum structures where mass reduction matters.
Gas Atomized Metal Powder for Additive Manufacturing
Gas atomized metal powder for additive manufacturing explained through spherical morphology, PSD control, alloy families, LPBF fit, and RFQ priorities.
Metal Powder Specification and COA Guide: PSD, Oxygen, and Flow
Specify AM metal powder and read a COA using chemistry, D10/D50/D90, oxygen, morphology, density, flow, sampling, traceability, and RFQ fields.
Request price and availability
Send grade, particle size, quantity and destination. Paid samples from 1 kg; export licence and dangerous-goods shipping handled. Exporting metal powders since 2016.