AlSi10Mg powder — supplier & RFQ
Lightweight aluminum powder for housings, brackets, thermal structures, and transportation hardware.
- PSD20–63 µm · 15–53 µm · 45–106 µm
- ProcessLPBF
- List priceUS$18–74/kg
- Min. pack1 kg
- Grade
- AlSi10Mg
- Particle size
- 20–63 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF
- List price
- US$18–74/kg
- Samples
- Paid · from 1 kg
- Packaging
- Aluminium-foil bag · 1 kg sealed pack · Drum
- Lot documents
- Lot-specific COA · Particle-size report · Safety data sheet · Chemistry report
AlSi10Mg powder applications by industry
| Industry | Typical parts | Why AlSi10Mg | Specify in your RFQ |
|---|---|---|---|
| Aerospace, UAV and satellites Guide → | Housings, brackets, RF and electronics enclosures | The most established LPBF aluminium alloy: light, printable, good thermal conductivity | Heat treatment, fatigue requirement, surface finish |
| Automotive and motorsport Guide → | Brackets, intake and cooling parts, prototypes | Low mass and fast LPBF builds | Load cases, heat treatment, machining |
| Thermal management | Heat exchangers, cold plates, heat sinks | Good conductivity with free-form channels | Coolant, leak test, internal powder removal |
Designations
- AlSi10Mg
- Aluminum-silicon-magnesium
AlSi10Mg is the primary international procurement term. Include the governing chemistry, temper or post-process plan, and powder acceptance method in the RFQ.
Particle size and powder properties
- Standard cuts
- 20–63 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF
- Typical uses
- Lightweight housings · Brackets and frames · Thermal and electronics structures
| Property | Typical value | Note |
|---|---|---|
| D10 | ≥15 µm | — |
| D50 | 30–45 µm | — |
| D90 | ≤70 µm | — |
| Sphericity | ≥0.90 | Method to be confirmed |
| Apparent density | ≥1.35 g/cm³ | — |
| Tap density | ≥1.6 g/cm³ | — |
LPBF screening window. Measured values are reported on the lot COA.
Chemical composition
| Al | Si | Mg | Fe | Mn | Zn | Ni | O |
|---|---|---|---|---|---|---|---|
| Balance | 9.0–11.0 | 0.25–0.45 | ≤0.55 | ≤0.45 | ≤0.10 | ≤0.05 | ≤0.08 |
wt.% · Typical partner-plant datasheet limits, wt.%. The quoted lot COA governs.
Typical mechanical properties
| Condition | Temperature | Tensile | Yield | Elongation |
|---|---|---|---|---|
| Heat treated | Room temperature | ≥280 MPa | ≥180 MPa | ≥10% |
Partner-plant datasheet values for LPBF test bars at room temperature unless stated. Printed-part properties depend on machine, parameters, orientation, and post-processing.
AlSi10Mg powder data sheet, SDS and lot COA
Supplied with each lot
- Lot-specific COA
- Particle-size report
- Safety data sheet
- Chemistry report
State the governing AlSi10Mg or customer chemistry, moisture and handling controls, and the intended heat-treatment condition.
Packaging
- Aluminium-foil bag — very small quantities and paid samples
- 1 kg sealed pack — minimum standard package
- Drum — production lots
Samples are paid. The smallest standard pack is 1 kg.
Download the Aluminum AlSi10Mg datasheet (PDF)
What to check in each AlSi10Mg document: TDS, COA or SDS .
Export
Export & compliance →For every Aluminum AlSi10Mg order we check export-control classification and transport requirements before quoting a ship date, and prepare the SDS, transport classification and shipping documents as one set.
Price
List price · EXW China
US$18–74/kg
Our list price for LPBF cuts (15–45 µm or 15–53 µm), per kg, EXW China, from 1 kg. It is set at 80–90% of the public list prices of mainstream suppliers checked in October 2026. Other particle-size cuts are priced by agreement; packing and freight are quoted separately. Your written quotation from our official corporate email confirms the price, lead time and terms for your quantity, particle size and documents.
Technical notes
- AlSi10Mg Powder for LPBF: Aluminum Powder Data Sheet and Specification
- Gas Atomized Metal Powder for Additive Manufacturing
- Metal 3D Printing Powder Price per kg: 2026 Ranges and RFQ Guide
- Metal Powder Specification and COA Guide: PSD, Oxygen, and Flow
- AlSi10Mg Powder for Lightweight Housings and Brackets