CuCrZr C18150 powder — supplier & RFQ
Conductive copper-alloy powder for thermal, electrical, RF, tooling, and high-heat-flux components.
- PSD15–45 µm · 15–53 µm · 45–106 µm
- ProcessLPBF
- List priceUS$51–81/kg
- Min. pack1 kg
- Grade
- CuCr1Zr · C18150
- Particle size
- 15–45 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF
- List price
- US$51–81/kg
- Samples
- Paid · from 1 kg
- Packaging
- Aluminium-foil bag · 1 kg sealed pack · Drum
- Lot documents
- Lot-specific COA · Particle-size report · Safety data sheet · Chemistry report
CuCrZr C18150 powder applications by industry
| Industry | Typical parts | Why CuCrZr C18150 | Specify in your RFQ |
|---|---|---|---|
| Electronics and data-center cooling Guide → | Cold plates, heat sinks, GPU and power-module cooling | Copper alloy that keeps high conductivity with more strength than pure copper | Conductivity method, aging condition, leak test |
| Rocket propulsion Guide → | Combustion chamber liners, regeneratively cooled nozzles | High heat flux with strength after aging | Heat flux, proof pressure, HIP and aging |
| Welding and induction Guide → | Welding electrodes and contacts, induction tooling | Conductivity with hardness at temperature | Contact wear, cooling, aging |
| Fusion energy Guide → | High-heat-flux cooling components | Established copper alloy for heat-sink duty | Qualification basis, irradiation and joining requirements |
Designations
- CuCrZr
- CuCr1Zr
- UNS C18150
CuCrZr, CuCr1Zr, and C18150 are common procurement searches, but the chemistry and condition should be confirmed before treating the designations as equivalent.
Particle size and powder properties
- Standard cuts
- 15–45 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF
- Typical uses
- Cold plates and heat exchangers · Induction and electrical hardware · Conductive tooling
| Property | Typical value | Note |
|---|---|---|
| D10 | ≥15 µm | — |
| D50 | 30–40 µm | — |
| D90 | ≤60 µm | — |
| Sphericity | ≥0.90 | Method to be confirmed |
| Apparent density | ≥4.4 g/cm³ | — |
| Tap density | ≥5.2 g/cm³ | — |
| Flow | ≤22 s/50 g | Method and conditioning to be confirmed |
LPBF screening window. Measured values are reported on the lot COA.
Chemical composition
| Cu | Cr | Zr | Fe | Si | O | N |
|---|---|---|---|---|---|---|
| Balance | 0.50–1.50 | 0.05–0.25 | ≤0.15 | ≤0.10 | ≤0.10 | ≤0.05 |
wt.% · Typical partner-plant datasheet limits, wt.%. The quoted lot COA governs.
Typical mechanical properties
| Condition | Temperature | Tensile | Yield | Elongation |
|---|---|---|---|---|
| Heat treated | Room temperature | ≥350 MPa | ≥250 MPa | ≥30% · Electrical conductivity ≥85% IACS |
Partner-plant datasheet values for LPBF test bars at room temperature unless stated. Printed-part properties depend on machine, parameters, orientation, and post-processing.
Second-partner LPBF test series: strength-oriented heat treatment
- As-built relative density
- ≥99.9%
- As-built electrical conductivity
- 23.2–24.4% IACS
- Tensile / yield / elongation, heat treated, XY, room temperature
- 586 MPa / 519 MPa / 22.4%
- Tensile / yield / elongation, heat treated, Z, room temperature
- 531 MPa / 504 MPa / 24.7%
- Tensile / yield / elongation, heat treated, XY, at 500 °C after a 30 min hold in air
- 361 MPa / 358 MPa / 14.6%
- Electrical conductivity after heat treatment
- 76% IACS
- Thermal conductivity after heat treatment, 25 °C
- 325–340 W/(m·K)
- Zr ranges offered by this partner
- 0.03–0.3% (standard CuCr1Zr) or 0.3–0.6% (high-Zr version)
Measured by a second partner manufacturer on LPBF specimens (infrared laser) built from its own CuCr1Zr powder. One reported test series, not a lot guarantee. Its heat treatment was chosen for strength, so its conductivity is lower than the datasheet minimum above; state which strength-conductivity balance your part needs.
Documents and packaging
Supplied with each lot
- Lot-specific COA
- Particle-size report
- Safety data sheet
- Chemistry report
State the governing chemistry or customer specification plus the required electrical or thermal conductivity and heat-treatment condition.
Packaging
- Aluminium-foil bag — very small quantities and paid samples
- 1 kg sealed pack — minimum standard package
- Drum — production lots
Samples are paid. The smallest standard pack is 1 kg.
Export
Export & compliance →For every Copper Alloy CuCrZr order we check export-control classification and transport requirements before quoting a ship date, and prepare the SDS, transport classification and shipping documents as one set.
Price
List price · EXW China
US$51–81/kg
Our list price for LPBF cuts (15–45 µm or 15–53 µm), per kg, EXW China, from 1 kg. It is set at 80–90% of the public list prices of mainstream suppliers checked in October 2026. Other particle-size cuts are priced by agreement; packing and freight are quoted separately. Your written quotation from our official corporate email confirms the price, lead time and terms for your quantity, particle size and documents.
Other copper alloy grades
| Powder | Particle size | Process |
|---|---|---|
| Pure copper powder for 3D printing | 15–45 µm · 15–53 µm | LPBF |
| CuSn10 bronze powder | 15–45 µm · 15–53 µm | LPBF |
| GRCop-42 powder | 15–45 µm · 15–53 µm | LPBF |
Technical notes
- CuCrZr Powder Guide: Chemistry, PSD & Conductivity Evidence
- CuCrZr vs pure copper: conductivity or strength-conductivity balance?
- CuCrZr Powder for Copper Cold Plates and Heat Sink Applications
- CuCrZr Powder for Conductive Tooling and Welding Contacts
- CuCrZr Powder for Fusion and High-Heat-Flux Cooling Components
- CuCrZr Powder for Regeneratively Cooled Rocket Chambers
- GRCop-42 vs CuCrZr Powder: Choosing a High-Heat-Flux Copper Alloy