Ti64 Powder for Robotic Arm Brackets and End-Effector Hardware
Where Ti64 powder fits compact robotic arm brackets, wrist-side supports, and end-effector hardware when low mass, stiffness, and complex mounting geometry matter.
Blog
Technical articles on metal powder materials and buying decisions.
Archive page 3 of 5.
Gas Atomized Metal Powder for Additive Manufacturing
Gas atomized metal powder for additive manufacturing explained through spherical morphology, PSD control, alloy families, LPBF fit, and RFQ priorities.
Metal Powder Specification and COA Guide: PSD, Oxygen, and Flow
Specify AM metal powder and read a COA using chemistry, D10/D50/D90, oxygen, morphology, density, flow, sampling, traceability, and RFQ fields.
Nickel Alloy Powder for 3D Printing: High-Temperature Alloy Selection
Choose a high-temperature powder alloy for 3D printing. Compare IN718, IN625, Alloy X, Alloy 230, Alloy 188, IN939 and IN738 by failure mode, temperature basis and LPBF risk.
Titanium Powder for 3D Printing: Ti64, Grade 23, Grade 2, and TA15
Choose titanium powder by exact grade, process, PSD and lot evidence. Compare Ti6Al4V Grade 5, Grade 23 ELI, Grade 2 and TA15 before requesting a quote.
Steel Metal Powder for 3D Printing: 316L, 17-4PH, H13, M300
Compare 316L, 17-4PH, H13, and M300 steel powder for 3D printing by corrosion, strength, tooling use, process route, heat treatment, PSD, and RFQ requirements.
Metal 3D Printing Powder Price per kg: 2026 Ranges and RFQ Guide
October 2026 public price ranges per kg for 316L, 17-4PH, Ti6Al4V, IN718, IN625, AlSi10Mg, copper and cobalt chrome AM powders, plus the cost drivers to check before a formal quote.
Additive Manufacturing Powder Suppliers and Manufacturers: Buyer Guide
Qualify AM powder suppliers and manufacturers by alloy, PSD, COA, traceability, change control, price basis, packaging, and application risk.
Metal Powder for 3D Printing: Alloys, Sizes, and Buying Guide
A practical metal powder for 3D printing guide covering alloy selection, LPBF and DED particle sizes, powder quality, price, suppliers, and RFQ details.
IN718 Powder for Rocket Turbopump Impellers and Compressor Hardware
Select and specify IN718 powder for LPBF rocket turbopump impellers, inducers, compressor hardware, heat treatment, inspection, and RFQ evidence.
316L vs Nickel Powder for Corrosion-Side Manifolds
A practical comparison of 316L and nickel-alloy powder for corrosion-side manifolds where media, temperature, and geometry decide the correct AM route.
CoCrMo vs Stainless Powder for Wear-Critical Industrial Hardware
When CoCrMo powder is the better AM route than stainless for wear-critical industrial hardware, and when stainless still stays cleaner.
CuCrZr Powder for Regeneratively Cooled Rocket Chambers
Select CuCrZr or C18150 powder for a regeneratively cooled rocket chamber liner, including alloy boundaries, cooling channels, bimetallic jackets, inspection, and RFQ fields.
17-4PH Powder for Metal Injection Molding and Binder Jet Parts
Specify 17-4PH powder for MIM or binder jetting with controls for feedstock form, sintering, final chemistry, heat treatment, shrinkage, and lot evidence.
316L Powder for Metal Injection Molding and Binder Jet Parts
Specify 316L powder for MIM and binder jetting by feedstock form, sintering route, density or pore target, corrosion duty, and dimensional acceptance.