H13 Tool Steel Powder for AM Die-Casting Inserts and Conformal Cooling
H13 (1.2344) hot-work tool steel powder for LPBF die-casting inserts and conformal-cooled tools, with crack control, heat treatment and RFQ fields.
Blog
Technical articles on metal powder materials and buying decisions.
Archive page 5 of 5.
IN718 vs IN625 Powder: Strength, Corrosion & Heat Treatment
Compare IN718 and IN625 AM powders by load, corrosion exposure and post-build heat treatment. Specify grade, PSD and acceptance evidence for a comparable RFQ.
LPBF Powder Particle Size Guide: 15-45 vs 15-53 um
Practical LPBF powder particle size guidance covering common PSD windows, why they differ, and how they affect process fit.
M300 Maraging Steel Powder for AM Mold Inserts, Tooling and Fixtures
M300 (18Ni300, 1.2709) maraging steel powder for LPBF mold inserts, conformal cooling and fixtures, with aging route, H13 comparison and RFQ fields.
Ti64 vs Grade 2 Titanium Powder | Grade 5 or CP Ti?
Compare Ti6Al4V Grade 5 and CP Grade 2 titanium powder by alloy identity, service requirements, LPBF acceptance evidence, and grade-specific RFQ inputs.
17-4PH Precipitation Hardening Stainless Steel Powder for AM
Specify 17-4PH powder for AM by atomization route, nitrogen, PSD and intended heat treatment. Separate powder COA evidence from final-part acceptance before RFQ.
316L Stainless Steel Powder for LPBF | PSD & Lot Acceptance
Specify 316L / UNS S31603 powder for LPBF by particle size, chemistry, lot documents, and application requirements, then request a grade-specific quote.
AlSi10Mg Powder for LPBF: Aluminum Powder Data Sheet and Specification
AlSi10Mg aluminum powder for LPBF with typical data sheet chemistry, PSD cuts and test-bar properties. Learn how to read the TDS, COA and SDS and what to send for a quote.
CuCrZr Powder Guide: Chemistry, PSD & Conductivity Evidence
Specify CuCrZr powder for AM with exact chemistry, measured PSD and lot documentation. Check conductivity and strength in the same final heat-treated condition.
GH3625 (IN625) Nickel Alloy Powder for Corrosion-Resistant AM Parts
IN625 powder guidance focused on corrosion resistance, powder quality, and application fit for harsh service environments.
GH4169 (IN718) Nickel Superalloy Powder for LPBF Additive Manufacturing
A practical IN718 powder guide covering GH4169 identity, LPBF suitability, powder controls, and post-processing logic for demanding AM parts.
TC4 (Ti-6Al-4V) Grade 5/23 Titanium Powder for LPBF, EBM & DED
A practical guide to TC4 titanium powder covering Grade 5 vs Grade 23, PSD selection, oxygen control, and process fit across LPBF, EBM, and DED.
CoCrMo / CoCrW Alloy Powders for Wear- and Corrosion-Resistant AM Parts
CoCrMo and CoCrW powder overview for AM applications that need corrosion resistance, wear resistance, and stable high-value alloy performance.
TA1 Commercially Pure Titanium (CP Ti) Powder for Additive Manufacturing
An engineering overview of TA1 commercially pure titanium powder for corrosion-resistant and biocompatibility-focused AM applications.
TA15 Titanium Powder for High-Temperature Structural AM
TA15 near-alpha titanium powder explained for elevated-temperature AM parts, including alloy logic, powder controls, and structural application fit.