17-4PH stainless steel powder — supplier & RFQ
Precipitation-hardening stainless powder for higher-strength tooling, fixtures, housings, and production hardware.
- PSD15–45 µm · 15–53 µm · 45–106 µm
- ProcessLPBF · Binder jet · MIM
- List priceUS$13–63/kg
- Min. pack1 kg
- Grade
- 17-4PH · S17400
- Particle size
- 15–45 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF · Binder jet · MIM
- List price
- US$13–63/kg
- Samples
- Paid · from 1 kg
- Packaging
- Aluminium-foil bag · 1 kg sealed pack · Drum
- Lot documents
- Lot-specific COA · Particle-size report · Safety data sheet · Chemistry report
17-4PH stainless steel powder applications by industry
| Industry | Typical parts | Why 17-4PH stainless steel | Specify in your RFQ |
|---|---|---|---|
| Workholding and fixtures Guide → | Clamp bodies, jigs, inspection and welding fixtures | Precipitation-hardening stainless: stronger and harder than 316L | Aging condition, hardness, datums and wear surfaces |
| Industrial automation | Actuator housings, latches, sensor mounts | Small loaded parts where 316L is too soft | Load direction, contact zones, machined features |
| Oil and gas, pumps and valves | Valve-adjacent brackets, actuator and pump hardware | Strength where 316L lacks margin and nickel alloys are oversized | Pressure duty, fluids, sour-service status (sour service usually needs IN625) |
| MIM and binder jet Guide → | High-volume small stainless parts | Established sintered precipitation-hardening route | Sintering, heat treatment, density |
Designations
- 17-4PH
- UNS S17400
- AISI 630
Use 17-4PH, UNS S17400, or AISI 630 for international sourcing. Keep the powder chemistry requirement separate from the finished-part heat-treatment condition.
Particle size and powder properties
- Standard cuts
- 15–45 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF · Binder jet · MIM
- Typical uses
- Fixtures and workholding · Structural housings · Higher-strength stainless parts
| Property | Typical value | Note |
|---|---|---|
| D10 | ≥15 µm | — |
| D50 | 30–40 µm | — |
| D90 | ≤60 µm | — |
| Sphericity | ≥0.90 | Method to be confirmed |
| Apparent density | ≥4.0 g/cm³ | — |
| Tap density | ≥4.5 g/cm³ | — |
| Flow | ≤20 s/50 g | Method and conditioning to be confirmed |
LPBF screening window. Measured values are reported on the lot COA.
Chemical composition
| Fe | Cr | Ni | Cu | Nb | C | Mn | Si | P | S | O | N |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Balance | 15.0–17.5 | 3.0–5.0 | 3.0–5.0 | 0.15–0.45 | ≤0.07 | ≤1.0 | ≤1.0 | ≤0.015 | ≤0.015 | ≤0.08 | ≤0.15 |
wt.% · Typical partner-plant datasheet limits, wt.%. The quoted lot COA governs.
Typical mechanical properties
| Condition | Temperature | Tensile | Yield | Elongation |
|---|---|---|---|---|
| Heat treated | Room temperature | ≥1100 MPa | ≥1000 MPa | ≥12% |
Partner-plant datasheet values for LPBF test bars at room temperature unless stated. Printed-part properties depend on machine, parameters, orientation, and post-processing.
Documents and packaging
Supplied with each lot
- Lot-specific COA
- Particle-size report
- Safety data sheet
- Chemistry report
State the UNS, AISI, or customer chemistry basis and define the intended build, sintering, and precipitation-hardening route.
Packaging
- Aluminium-foil bag — very small quantities and paid samples
- 1 kg sealed pack — minimum standard package
- Drum — production lots
Samples are paid. The smallest standard pack is 1 kg.
Export
Export & compliance →For every Stainless Steel 17-4PH order we check export-control classification and transport requirements before quoting a ship date, and prepare the SDS, transport classification and shipping documents as one set.
Price
List price · EXW China
US$13–63/kg
Our list price for LPBF cuts (15–45 µm or 15–53 µm), per kg, EXW China, from 1 kg. It is set at 80–90% of the public list prices of mainstream suppliers checked in October 2026. Other particle-size cuts are priced by agreement; packing and freight are quoted separately. Your written quotation from our official corporate email confirms the price, lead time and terms for your quantity, particle size and documents.
Other stainless steel grades
| Powder | Particle size | Process |
|---|---|---|
| 316L stainless steel powder | 15–45 µm · 15–53 µm · 45–106 µm | LPBF · DED · Binder jet · MIM |
| 15-5PH powder | 15–45 µm · 15–53 µm | LPBF |
| 304L stainless steel powder | 15–45 µm · 15–53 µm · 45–106 µm | LPBF · DED |
| 420 stainless steel powder | 15–45 µm · 15–53 µm | LPBF |
Technical notes
- 17-4PH Precipitation Hardening Stainless Steel Powder for AM
- 316L vs 17-4PH: corrosion duty or heat-treated strength?
- 17-4PH Powder for Metal Injection Molding and Binder Jet Parts
- CoCrMo vs Stainless Powder for Wear-Critical Industrial Hardware
- LPBF Metal Powder for Defense Sustainment and Flight-Ready Spares
- Metal Powder for Gas-Cooled and Liquid-Sodium Reactor Hardware
- HIP Canister Requirements for Reactor Valves and Pump Casings
- Ti64 vs 17-4PH Powder for Humanoid Robot Joint Hardware