IN625 alloy powder — supplier & RFQ
Solid-solution nickel alloy powder for corrosion-heavy chemical, marine, energy, and hot-side hardware.
- PSD15–45 µm · 15–53 µm · 45–106 µm
- ProcessLPBF · DED
- List priceUS$45–104/kg
- Min. pack1 kg
- Grade
- IN625 · GH3625
- Particle size
- 15–45 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF · DED
- List price
- US$45–104/kg
- Samples
- Paid · from 1 kg
- Packaging
- Aluminium-foil bag · 1 kg sealed pack · Drum
- Lot documents
- Lot-specific COA · Particle-size report · Safety data sheet · Chemistry report
IN625 alloy powder applications by industry
| Industry | Typical parts | Why IN625 alloy | Specify in your RFQ |
|---|---|---|---|
| Oil and gas, sour service Guide → | Valves, chokes, downhole flow hardware | Solid-solution nickel alloy with strong resistance to pitting, crevice and chloride attack | H2S and chloride levels, applicable sour-service standard, NDE |
| Cladding and repair Guide → | DED overlays and rebuilt components | Corrosion-resistant overlay with good weldability | Dilution, base metal, overlay thickness, inspection |
| Marine and desalination Guide → | Pump, valve and brine hardware | Seawater and brine resistance | Chloride level, temperature, crevice geometry |
| Energy and carbon capture Guide → | Geothermal, molten-salt and amine-service hardware | Broad corrosion resistance at temperature | Media chemistry, temperature, qualification basis |
| Chemical processing Guide → | Heat exchangers, nozzles, reactor internals | Fabricable corrosion workhorse | Media, temperature, pressure code |
Designations
- Alloy 625
- IN625
- UNS N06625
- GH3625
IN625, Alloy 625, and UNS N06625 are common international designations. Pair GH3625 with the governing chemistry, and state any branded-material requirement explicitly.
Particle size and powder properties
- Standard cuts
- 15–45 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF · DED
- Typical uses
- Corrosion-heavy hardware · Chemical nozzles and manifolds · Repair and overlay routes
| Property | Typical value | Note |
|---|---|---|
| D10 | ≥15 µm | — |
| D50 | 30–40 µm | — |
| D90 | ≤60 µm | — |
| Sphericity | ≥0.90 | Method to be confirmed |
| Apparent density | ≥4.4 g/cm³ | — |
| Tap density | ≥5.0 g/cm³ | — |
| Flow | ≤18 s/50 g | Method and conditioning to be confirmed |
LPBF screening window. Measured values are reported on the lot COA.
Chemical composition
| Ni | Cr | Mo | Nb | Fe | Co | Ti | Al | C | Si | Mn | O | N |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Balance | 20.0–23.0 | 8.0–10.0 | 3.15–4.15 | ≤5.0 | ≤1.0 | ≤0.40 | ≤0.40 | ≤0.10 | ≤0.50 | ≤0.50 | ≤0.02 | ≤0.02 |
wt.% · Typical partner-plant datasheet limits for 625-type (GH3625) powder, wt.%. The quoted lot COA governs.
Typical mechanical properties
| Condition | Temperature | Tensile | Yield | Elongation |
|---|---|---|---|---|
| Heat treated | Room temperature | ≥830 MPa | ≥410 MPa | ≥35% |
| Heat treated | 815 °C | ≥350 MPa | ≥240 MPa | ≥30% |
Partner-plant datasheet values for LPBF test bars at room temperature unless stated. Printed-part properties depend on machine, parameters, orientation, and post-processing.
Documents and packaging
Supplied with each lot
- Lot-specific COA
- Particle-size report
- Safety data sheet
- Chemistry report
State the UNS, customer, or program chemistry basis together with the service environment, corrosion-test scope, and DED dilution limits where relevant.
Packaging
- Aluminium-foil bag — very small quantities and paid samples
- 1 kg sealed pack — minimum standard package
- Drum — production lots
Samples are paid. The smallest standard pack is 1 kg.
Export
Export & compliance →For every Nickel Alloy 625 order we check export-control classification and transport requirements before quoting a ship date, and prepare the SDS, transport classification and shipping documents as one set.
Price
List price · EXW China
US$45–104/kg
Our list price for LPBF cuts (15–45 µm or 15–53 µm), per kg, EXW China, from 1 kg. It is set at 80–90% of the public list prices of mainstream suppliers checked in October 2026. Other particle-size cuts are priced by agreement; packing and freight are quoted separately. Your written quotation from our official corporate email confirms the price, lead time and terms for your quantity, particle size and documents.
Other nickel alloy grades
| Powder | Particle size | Process |
|---|---|---|
| IN718 alloy powder | 15–45 µm · 15–53 µm · 45–106 µm | LPBF · DED |
| Alloy X powder | 15–45 µm · 15–53 µm · 45–106 µm | LPBF |
| IN939 powder | 15–45 µm · 15–53 µm | LPBF |
| IN738 powder | 15–45 µm · 15–53 µm · 53–150 µm | LPBF · DED |
| Alloy 230 powder | 15–45 µm · 15–53 µm | LPBF |
Technical notes
- GH3625 (IN625) Nickel Alloy Powder for Corrosion-Resistant AM Parts
- IN718 vs IN625: hot strength or corrosion-side duty?
- Metal Powder Applications: Choose an Alloy by Part Requirement
- 316L and IN625 Powder for PM-HIP Nuclear Pressure Components
- 316L vs Nickel Powder for Corrosion-Side Manifolds
- IN625 DED Powder for Repair Overlays and Oilfield Corrosion Hardware
- IN625 Powder for Carbon Capture Amine-Service and CO2 Compression Hardware
- IN625 Powder for Geothermal Brine Heat-Exchanger and Valve Hardware