IN718 alloy powder — supplier & RFQ
Precipitation-hardenable nickel alloy powder for high-temperature structures, turbines, and energy hardware.
- PSD15–45 µm · 15–53 µm · 45–106 µm
- ProcessLPBF · DED
- List priceUS$44–90/kg
- Min. pack1 kg
- Grade
- IN718 · GH4169
- Particle size
- 15–45 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF · DED
- List price
- US$44–90/kg
- Samples
- Paid · from 1 kg
- Packaging
- Aluminium-foil bag · 1 kg sealed pack · Drum
- Lot documents
- Lot-specific COA · Particle-size report · Safety data sheet · Chemistry report
IN718 alloy powder applications by industry
| Industry | Typical parts | Why IN718 alloy | Specify in your RFQ |
|---|---|---|---|
| Gas turbines and aerospace engines Guide → | Fuel nozzles, swirlers, brackets, casings | Precipitation-hardened nickel alloy with high strength up to roughly 650 °C | Solution and aging route, HIP, governing specification, NDE |
| Turbomachinery Guide → | Impellers, compressor parts | Strength and fatigue at temperature | Balancing, surface finish, fatigue evidence |
| Rocket propulsion Guide → | Injectors, turbopump housings, manifolds | Strength across cryogenic to warm service | Hydrogen or oxygen compatibility, proof testing |
| Oil and gas | Downhole tool parts, valve components | High strength with corrosion resistance | Hardness and heat-treatment limits of the governing oil-and-gas specification |
Designations
- Alloy 718
- IN718
- UNS N07718
- GH4169
IN718, Alloy 718, and UNS N07718 are common international designations. Pair GH4169 with the governing chemistry, and state any branded-material requirement explicitly.
Particle size and powder properties
- Standard cuts
- 15–45 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF · DED
- Typical uses
- Turbomachinery hardware · High-temperature structures · Hot-side housings
| Property | Typical value | Note |
|---|---|---|
| D10 | ≥15 µm | — |
| D50 | 30–40 µm | — |
| D90 | ≤60 µm | — |
| Sphericity | ≥0.90 | Method to be confirmed |
| Apparent density | ≥4.4 g/cm³ | — |
| Tap density | ≥5.0 g/cm³ | — |
| Flow | ≤18 s/50 g | Method and conditioning to be confirmed |
LPBF screening window. Measured values are reported on the lot COA.
Chemical composition
| Ni | Cr | Fe | Nb | Mo | Ti | Al | Co | C | Mn | Si | O | N |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50.0–55.0 | 17.0–21.0 | Balance | 4.75–5.50 | 2.80–3.30 | 0.65–1.15 | 0.20–0.80 | ≤1.0 | ≤0.08 | ≤0.35 | ≤0.35 | ≤0.02 | ≤0.02 |
wt.% · Typical partner-plant datasheet limits for 718-type (GH4169) powder, wt.%. The quoted lot COA governs.
Typical mechanical properties
| Condition | Temperature | Tensile | Yield | Elongation |
|---|---|---|---|---|
| Solution + aged | Room temperature | ≥1300 MPa | ≥1100 MPa | ≥15% |
| Solution + aged | 650 °C | ≥1000 MPa | ≥900 MPa | ≥12% |
| Stress rupture | 650 °C / 690 MPa | ≥30 h life | — | ≥5% |
Partner-plant datasheet values for LPBF test bars at room temperature unless stated. Printed-part properties depend on machine, parameters, orientation, and post-processing.
Documents and packaging
Supplied with each lot
- Lot-specific COA
- Particle-size report
- Safety data sheet
- Chemistry report
State the UNS, customer, or program chemistry basis plus the heat-treatment route and temperature-specific test requirements.
Packaging
- Aluminium-foil bag — very small quantities and paid samples
- 1 kg sealed pack — minimum standard package
- Drum — production lots
Samples are paid. The smallest standard pack is 1 kg.
Export
Export & compliance →For every Nickel Alloy 718 order we check export-control classification and transport requirements before quoting a ship date, and prepare the SDS, transport classification and shipping documents as one set.
Price
List price · EXW China
US$44–90/kg
Our list price for LPBF cuts (15–45 µm or 15–53 µm), per kg, EXW China, from 1 kg. It is set at 80–90% of the public list prices of mainstream suppliers checked in October 2026. Other particle-size cuts are priced by agreement; packing and freight are quoted separately. Your written quotation from our official corporate email confirms the price, lead time and terms for your quantity, particle size and documents.
Other nickel alloy grades
| Powder | Particle size | Process |
|---|---|---|
| IN625 alloy powder | 15–45 µm · 15–53 µm · 45–106 µm | LPBF · DED |
| Alloy X powder | 15–45 µm · 15–53 µm · 45–106 µm | LPBF |
| IN939 powder | 15–45 µm · 15–53 µm | LPBF |
| IN738 powder | 15–45 µm · 15–53 µm · 53–150 µm | LPBF · DED |
| Alloy 230 powder | 15–45 µm · 15–53 µm | LPBF |
Technical notes
- GH4169 (IN718) Nickel Superalloy Powder for LPBF Additive Manufacturing
- IN718 vs IN625: hot strength or corrosion-side duty?
- Additive Manufacturing Powder Suppliers and Manufacturers: Buyer Guide
- IN718 Powder for Gas Turbine Fuel Nozzles and Combustor Swirler Hardware
- IN718 Powder for Rocket Turbopump Impellers and Compressor Hardware
- LPBF Metal Powder for Defense Sustainment and Flight-Ready Spares
- Metal Powder Grade Equivalents: Names by Country and Industry
- Metal Powder for Rocket Injectors, Cryogenic Valves, and Feed Manifolds