M300 maraging steel powder — supplier & RFQ
High-strength maraging steel powder for mold inserts, precision tooling, and age-hardened production components.
- PSD15–45 µm · 15–53 µm · 45–106 µm
- ProcessLPBF · DED
- List priceUS$30–113/kg
- Min. pack1 kg
- Grade
- 18Ni300 · 1.2709
- Particle size
- 15–45 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF · DED
- List price
- US$30–113/kg
- Samples
- Paid · from 1 kg
- Packaging
- Aluminium-foil bag · 1 kg sealed pack · Drum
- Lot documents
- Lot-specific COA · Particle-size report · Safety data sheet · Chemistry report
M300 maraging steel powder applications by industry
| Industry | Typical parts | Why M300 maraging steel | Specify in your RFQ |
|---|---|---|---|
| Plastic injection molding Guide → | Mold inserts, core inserts, sliders and lifters with conformal cooling | High strength and hardness after aging with good dimensional recovery | Aging condition, hardness, polishing, channel leak test |
| Automation and robotics Guide → | Gripper jaws, end-of-arm tooling | Very high strength in compact, lightweighted parts | Contact wear, aging condition, replaceable inserts |
| Motorsport and aerospace | High-strength brackets and mechanism parts | Ultra-high strength steel after aging | Corrosion protection (maraging steel rusts), fatigue requirement |
Designations
- M300
- 18Ni300
- Maraging 300
- EN 1.2709
M300, 18Ni300, maraging 300, and EN 1.2709 are common search designations. Confirm the governing chemistry because commercial naming can conceal different limits.
Particle size and powder properties
- Standard cuts
- 15–45 µm · 15–53 µm · 45–106 µm
- Processes
- LPBF · DED
- Typical uses
- Mold inserts · Precision tooling · Age-hardened structural parts
| Property | Typical value | Note |
|---|---|---|
| D10 | ≥15 µm | — |
| D50 | 30–40 µm | — |
| D90 | ≤60 µm | — |
| Sphericity | ≥0.90 | Method to be confirmed |
| Apparent density | ≥4.0 g/cm³ | — |
| Tap density | ≥4.5 g/cm³ | — |
| Flow | ≤20 s/50 g | Method and conditioning to be confirmed |
LPBF screening window. Measured values are reported on the lot COA.
Chemical composition
| Fe | Ni | Co | Mo | Ti | Al | C | Cr | Si | Mn | O | N |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Balance | 17.0–19.0 | 8.5–9.5 | 4.5–5.2 | 0.6–0.8 | 0.05–0.15 | ≤0.03 | ≤0.30 | ≤0.10 | ≤0.10 | ≤0.04 | ≤0.02 |
wt.% · Typical partner-plant datasheet limits for 18Ni300 powder, wt.%. The quoted lot COA governs.
Typical mechanical properties
| Condition | Temperature | Tensile | Yield | Elongation |
|---|---|---|---|---|
| As built | Room temperature | ≥1170 MPa | — | ≥11% · 38–42 HRC |
| Aged | Room temperature | ≥1900 MPa | — | ≥4% · 54–57 HRC |
Partner-plant datasheet values for LPBF test bars at room temperature unless stated. Printed-part properties depend on machine, parameters, orientation, and post-processing.
Documents and packaging
Supplied with each lot
- Lot-specific COA
- Particle-size report
- Safety data sheet
- Chemistry report
State the M300, 18Ni300, EN, or customer chemistry basis together with the intended aging cycle and dimensional acceptance plan.
Packaging
- Aluminium-foil bag — very small quantities and paid samples
- 1 kg sealed pack — minimum standard package
- Drum — production lots
Samples are paid. The smallest standard pack is 1 kg.
Export
Export & compliance →For every Maraging Steel M300 order we check export-control classification and transport requirements before quoting a ship date, and prepare the SDS, transport classification and shipping documents as one set.
Price
List price · EXW China
US$30–113/kg
Our list price for LPBF cuts (15–45 µm or 15–53 µm), per kg, EXW China, from 1 kg. It is set at 80–90% of the public list prices of mainstream suppliers checked in October 2026. Other particle-size cuts are priced by agreement; packing and freight are quoted separately. Your written quotation from our official corporate email confirms the price, lead time and terms for your quantity, particle size and documents.
Other tool & maraging steel grades
| Powder | Particle size | Process |
|---|---|---|
| H13 tool steel powder | 15–45 µm · 15–53 µm · 45–106 µm | LPBF · DED |
| 12Cr9Ni maraging stainless powder | 15–45 µm · 15–53 µm | LPBF |