Metal Powder Grade Equivalents: Names by Country and Industry

Summary

Ti-6Al-4V is TC4, 3.7165 and TA6V; 316L is 1.4404, SUS316L and 022Cr17Ni12Mo2. Cross-reference AM powder grade names and see where equivalence fails.

Review powder specifications Request a powder quote

Procurement decision

Pick one governing designation, then map the others to it

Equivalent names come from different standards with different chemistry windows. Decide which standard governs the purchase, attach its limits, and treat every other name as a reference.

01

Governing standard

Which standard and edition does the drawing or purchase specification name, and is it a powder, part or wrought-product standard?

02

Chemistry window

Do the regional equivalents share the same limits for interstitials, iron, carbon and minor elements, or only the main alloying elements?

03

Industry requirement

Does the application add a medical, dental, aerospace or MIM designation that the general grade name does not cover?

04

Lot documents

Will the COA name the governing standard and report every element it limits?

Approval gate: Approve the lot against the governing standard and the attached chemistry. A matching alternative name is a reference, not evidence of conformity.

The same metal powder is sold under different names in different countries and industries. A US drawing calls for UNS R56400, a German buyer writes 3.7165, a Chinese mill certificate says TC4, a French legacy specification says TA6V and a Japanese engineer may simply say “64 titanium”. All five point to the Ti-6Al-4V family, but they come from different standards with their own chemistry windows, so they are comparable names, not automatically interchangeable specifications.

Use the tables below to recognise a powder under its other names. Then name one governing standard and edition in your purchase order, attach its chemistry limits, and treat every other designation as a reference. A matching name never proves that a lot meets your specification; the certificate of analysis (COA) against the governing standard does.

Short answer

  • Every major naming system describes the same alloy families differently:
    • UNS numbers in the US;
    • EN material numbers in Europe, often called Werkstoffnummer in Germany;
    • GB designations in China;
    • JIS in Japan, KS in Korea and GOST in Russia and the CIS.
  • Industries add their own names on top: aerospace (AMS), implants (ASTM F, ISO 5832), dentistry (ISO 22674), metal injection molding (MIM-316L), resistance welding (RWMA classes).
  • Close equivalents usually share the main alloying elements but can differ in interstitials, iron, carbon or minor elements. For titanium, nickel and copper powders, those are often the limits that matter.
  • Most standards behind these names cover wrought bar, sheet or castings, not powder. Powder requirements (particle size, flow, density, lot documents) have to be specified separately.

How the naming systems work

System Example How to read it
UNS (US, ASTM E527) S31603, N07718, R56400 Letter = family: S stainless, N nickel, R reactive and refractory (R5 titanium, R3 cobalt), C copper, T tool steel, K special steels
ASTM grade Grade 5, Grade 23 Grade numbers inside ASTM titanium specifications such as B348
AISI type 316L, 630, H13 Legacy US type numbers that still appear on drawings
EN material number 1.4404, 2.4668, 3.7165 German system, now EN 10027-2 for steels: 1 = steel, 2.4 = nickel alloys, 2.0 = copper alloys, 3.7 = titanium
EN steel name X2CrNiMo17-12-2 Chemistry in the name: X = high-alloy, carbon in hundredths of a percent, then main elements and contents
EN copper number CW106C, CW008A EN 1412: C = copper, W = wrought, final letter = alloy group
GB (China) 022Cr17Ni12Mo2, TC4, GH4169 Stainless names start with the carbon level (022 = max 0.030% C); TA / TC / TB = alpha / alpha-beta / beta titanium; GH = wrought and K = cast superalloy
JIS (Japan) SUS316L, SUS630, SKD61 SUS = stainless steel, SKD = alloy tool steel
KS (Korea) STS316L STS = stainless steel
GOST (Russia/CIS) 03Х17Н14М3, ВТ6 Cyrillic letters for elements (Х Cr, Н Ni, М Mo); ВТ = titanium alloys
AMS (aerospace) AMS 5662 Product-form specifications for bar, sheet or forgings, not for powder

Older French drawings may still use AFNOR names such as TA6V (Ti-6Al-4V) or NC19FeNb (alloy 718).

Titanium powder: names by country

Powder on this site US / ASTM Europe China Other names
Ti6Al4V Grade 5, UNS R56400 3.7165 (TiAl6V4) TC4 TA6V (France), ВТ6 / VT6 (Russia), “64 titanium” (Japan)
Ti6Al4V ELI Grade 23, UNS R56407 No separate number; ELI is set by the specification TC4ELI ASTM F136 for implant bar (UNS R56401)
CP titanium TA1 Closest: Grade 1, UNS R50250 3.7025 TA1 JIS Class 1
TA15 No common US grade — TA15 ВТ20 / VT20 (Russia)

ELI (extra-low interstitial) is a tighter oxygen and iron window, not a different alloy name. Chinese TA1 corresponds to Grade 1, not Grade 2 (see the traps section below). For additively manufactured parts, ASTM F2924 covers Ti-6Al-4V and ASTM F3001 covers Ti-6Al-4V ELI made by powder bed fusion.

Stainless steel powder

Powder on this site US Europe (EN) China (GB) Japan / Korea / other
316L UNS S31603 1.4404 (X2CrNiMo17-12-2) 022Cr17Ni12Mo2 (formerly 00Cr17Ni14Mo2) SUS316L, STS316L; 03Х17Н14М3 (GOST, ≈)
304L UNS S30403 1.4307 (X2CrNi18-9) 022Cr19Ni10 (formerly 00Cr19Ni10) SUS304L, STS304L
17-4PH UNS S17400, Type 630 1.4542 (X5CrNiCuNb16-4) 05Cr17Ni4Cu4Nb (formerly 0Cr17Ni4Cu4Nb) SUS630
15-5PH UNS S15500, XM-12 1.4545 (X5CrNiCu15-5) 05Cr15Ni5Cu4Nb —
420 UNS S42000 1.4021 (X20Cr13); 1.4028 (X30Cr13) has more carbon 20Cr13 (formerly 2Cr13); 30Cr13 SUS420J1, SUS420J2

China’s 2007 revision of GB/T 20878 renamed many stainless grades, so older certificates and drawings still use the former names in brackets. For printed 316L parts, ASTM F3184 covers powder bed fusion.

Tool and maraging steel powder

Powder on this site US Europe (EN) China (GB) Other names
H13 AISI H13, UNS T20813 1.2344 (X40CrMoV5-1) 4Cr5MoSiV1 SKD61 (JIS), 4Х5МФ1С (GOST)
M300 maraging Maraging 300, UNS K93120 1.2709 (X3NiCoMoTi18-9-5) 18Ni(300) 18Ni300 is the common AM shorthand

Mould makers in Europe tend to order by material number (1.2709, 1.2344), and Japanese tooling by JIS name (SKD61). The number fixes the chemistry family; the hardness target and heat treatment still have to be stated.

Nickel and cobalt superalloy powder

Powder on this site US Europe (EN) China (GB) Notes
Alloy 718 UNS N07718; AMS 5662 / 5663 (bar, forgings) 2.4668 (NiCr19Fe19Nb5Mo3) GH4169 (formerly GH169) NC19FeNb in older French specifications
Alloy 625 UNS N06625; AMS 5666 (bar) 2.4856 (NiCr22Mo9Nb) GH3625 —
Alloy X UNS N06002; AMS 5536 (sheet) 2.4665 (NiCr22Fe18Mo) GH3536 —
Alloy 230 UNS N06230 2.4733 GH3230 —
Alloy 738 IN738 / IN738LC (cast alloy) — K438 (cast) —
Alloy 188 UNS R30188 (cobalt base) — GH5188 —

Original producers’ trade names are common in this group. This site uses generic names (alloy 718, alloy 625, alloy X) and UNS numbers; for printed parts, ASTM F3055 (718) and ASTM F3056 (625) cover powder bed fusion. The two Chinese mappings are explained in more depth in the GH4169 vs IN718 and GH3625 vs IN625 guides.

Aluminium, copper and cobalt-chrome powder

Powder on this site US / international Europe (EN) China Notes
AlSi10Mg A360 is a similar die-casting alloy, not the same specification EN AC-43000 (AC-AlSi10Mg(a)); EN AC-43400 is the die-casting variant ZL104 is a nearby casting alloy, not identical ASTM F3318 for powder bed fusion parts
CuCrZr UNS C18150 CuCr1Zr, CW106C 铬锆铜 (chromium-zirconium copper) RWMA Class 2 for welding electrodes
Pure copper C10100 (OFE), C10200 (OF), C11000 (ETP) CW009A, CW008A, CW004A TU1 / TU2 (oxygen-free), T2 The grade sets the oxygen and conductivity
CuSn10 C52400 (≈, wrought phosphor bronze) CuSn10-C, CC480K (cast) ZCuSn10P1 (cast, with about 1% P, not identical) Also called 90/10 tin bronze
GRCop-42 NASA-developed Cu–4 at.% Cr–2 at.% Nb — — GRCop-84 is the higher Cr–Nb sibling
CoCrMo ASTM F75 (cast, UNS R30075), F1537 (wrought) ISO 5832-4 (cast), ISO 5832-12 (wrought) 钴铬钼 ASTM F3213 for powder bed fusion parts
CoCrMoW dental — ISO 22674 (dental metallic materials) 牙科钴铬 “NEM” (German), “non-precious” or “base-metal alloy” in dental labs

The same powder, different industry names

Industry How it names the material Example What to confirm
Aerospace AMS product specs, OEM material specs, trade names Alloy 718 to AMS 5662 AMS covers bar or forgings; agree a powder specification and a part specification
Medical implants ASTM F and ISO 5832 numbers, “ELI”, “implant grade” Ti-6Al-4V ELI to ASTM F136 F136 is wrought bar; printed parts follow F3001; device approval stays with the manufacturer
Dental labs “CoCr”, “NEM”, “non-precious”, ISO 22674 type CoCr dental alloy, type 5 Which alloy (CoCrMo or CoCrMoW), and ceramic bond and corrosion evidence
Metal injection molding MIM-prefixed names (ASTM B883, MPIF Standard 35) MIM-316L, MIM-17-4 PH These describe sintered material, not the loose powder
Tools and moulds EN material numbers, JIS names 1.2709, 1.2344, SKD61 Target hardness and heat treatment
Resistance welding RWMA classes, “chromium copper” RWMA Class 2 A class groups several alloys; state CuCrZr and its chemistry
PH stainless parts Condition codes after the grade 17-4PH H900, H1025, H1150 A condition is a heat treatment (ASTM A564), not a different powder
China domestic GB codes and Chinese names TC4, GH4169, 铬锆铜 Map them to UNS or EN in the purchase order

Where “equivalent” goes wrong

TA1 is not Grade 2

In Chinese titanium standards, TA1 corresponds to ASTM Grade 1 and TA2 to Grade 2. Oxygen and iron limits differ between them, which changes strength. See the TA1 commercially pure titanium guide before treating them as one material.

Grade 5, Grade 23 and F136 are three different windows

UNS R56400 (Grade 5), R56407 (Grade 23) and R56401 (ASTM F136) are all Ti-6Al-4V, but the ELI versions limit oxygen and iron more tightly. An implant specification that calls for ELI cannot be met with Grade 5 powder just because both are “TC4” to a general seller.

316L, 1.4404 and 1.4435 are not identical

EN 1.4435 is a 316L-type steel with a higher molybdenum and nickel window than 1.4404. Implant-grade 316L (ASTM F138, often called 316LVM) adds melting and cleanliness requirements that a general 316L name does not carry.

Similar numbers, different alloys

Russian ЭП718 (EP718) is a different nickel alloy from alloy 718, despite the number. C18200 is chromium copper without zirconium, so it is not a substitute for C18150 CuCrZr.

Casting and die-casting cousins of AlSi10Mg

A360, EN AC-43400 and ZL104 overlap with AlSi10Mg in silicon and magnesium but differ in iron, manganese or magnesium windows. For printed parts, name AlSi10Mg and the powder chemistry you need, and use ASTM F3318 for the part.

Wrought and cast families

In China, GH marks wrought superalloys (GH4169) and K marks cast alloys (K438). A powder may be specified to either chemistry, so state which one governs.

Trade names

Trade names belong to their producers and can tie a purchase to one source. Quote the generic name with its UNS or EN number and attach the chemistry window instead.

How to name the powder in your RFQ or purchase order

Field What to write Why
Grade Generic name plus UNS and any regional number the drawing uses Example: Ti-6Al-4V ELI, UNS R56407 (Grade 23), TC4ELI
Governing standard Number and edition, e.g. ASTM F3001-14(2021) Decides which chemistry table applies
Chemistry window Attach the limits, especially O, N, H, Fe and C This is where equivalent names differ
Powder properties Particle-size cut and test method, flow, density No grade name defines them
Product form and process Powder for LPBF, EBM, DED or MIM Bar and sheet standards do not cover powder
Documents COA that names the governing standard Shows which table the lot was checked against
Conflicts “If designations conflict, the attached chemistry governs” Removes ambiguity between names

Our grade pages list each powder’s related designations, particle-size cuts, chemistry and list price, and every grade has a downloadable PDF datasheet. For the full list of what a powder specification should contain, see the metal powder specification guide; for titanium bought from China, the titanium export guide covers grade naming, export licensing and lead time.

Before you send an RFQ, have ready:

  • the exact grade, with UNS and any regional names used on the drawing;
  • the governing standard and edition, plus the chemistry table;
  • the process (LPBF, EBM, DED, binder jet or MIM) and particle-size cut;
  • quantity, destination and required documents (COA, PSD report, SDS).

Request a quotation with those details; if you only have a regional designation, send it and we will map it to the generic grade for review.

Sources

Buyer evidence gate

Evidence to request before approval

A matching designation shows that a lot was checked against one chemistry table. It does not make two standards interchangeable or qualify the printed part.

Put these items in the RFQ

  • The designation set on the purchase order: generic name, UNS number and any regional number the drawing uses
  • The governing standard and edition, with its chemistry table attached
  • A lot COA that names the same standard and reports every element it limits
  • Particle-size cut and method, flow and density, which no designation defines

Standards and technical starting points

  • ASTM E527 How UNS numbers are assigned to metals and alloys; a UNS number identifies a chemistry, not a product form or a specification.
  • ISO/ASTM 52907:2019 Metal-powder documentation, traceability, sampling, PSD, chemistry, density, morphology, flow, contamination, packaging, and storage.

Need the available lot-specific COA, PSD report, TDS/SDS, SEM images, or packaging evidence? List the required files and acceptance basis in the powder RFQ.

Specifications & quotation

Review powder grades and request a quotation

Review the relevant powder grades, candidate particle sizes and available lot documents, then send your process, quantity and delivery requirements for a quotation.

Titanium Ti64 · Grade 5

Ti6Al4V powder

A widely used titanium alloy powder for lightweight structural AM parts where strength-to-weight performance matters.

Related designations
Ti-6Al-4V, Ti64, Grade 5, UNS R56400
Candidate PSD
15–45 µm / 15–53 µm / 45–105 µm
Process routes
LPBF, EBM, DED
Stainless steel 316L · S31603

316L stainless steel powder

A widely used corrosion-resistant powder for manifolds, fluid hardware, industrial parts, MIM, and binder jet.

Related designations
316L, UNS S31603, EN 1.4404
Candidate PSD
15–45 µm / 15–53 µm / 45–106 µm
Process routes
LPBF, DED, Binder jet, MIM
Nickel alloy IN718 · GH4169

IN718 alloy powder

Precipitation-hardenable nickel alloy powder for high-temperature structures, turbines, and energy hardware.

Related designations
Alloy 718, IN718, UNS N07718, GH4169
Candidate PSD
15–45 µm / 15–53 µm / 45–106 µm
Process routes
LPBF, DED

Need this powder?

Send grade, particle size, quantity and destination. Paid samples from 1 kg; export licence and dangerous-goods shipping handled. Exporting metal powders since 2016.

Related technical topics

Continue with related material, process, and application guidance.

Knowledge base Metal Powder Knowledge Base

Related Articles

WhatsApp sales