TA15 titanium powder — supplier & RFQ
Near-alpha titanium powder for elevated-temperature structural programs and aerospace development work.
- PSD15–53 µm · 45–105 µm
- ProcessLPBF · EBM · DED
- List priceOn request
- Min. pack1 kg
- Grade
- TA15
- Particle size
- 15–53 µm · 45–105 µm
- Processes
- LPBF · EBM · DED
- List price
- On request
- Samples
- Paid · from 1 kg
- Packaging
- Aluminium-foil bag · 1 kg sealed pack · Drum
- Lot documents
- Lot-specific COA · Particle-size report · Safety data sheet · Chemistry report
TA15 titanium powder applications by industry
| Industry | Typical parts | Why TA15 titanium | Specify in your RFQ |
|---|---|---|---|
| Aerospace hot structures Guide → | Airframe frames and fittings near engines, propulsion support structures | Near-alpha alloy that retains strength at higher service temperature than Ti6Al4V | Service temperature, governing chemistry (TA15 / Ti-6.5Al-2Zr-1Mo-1V), HIP and machining |
| Engine-adjacent components | Casings, mounts and ducts with moderate heat | Creep and strength advantage over Grade 5 in the warm range | Temperature-time profile, creep or fatigue test basis |
Designations
- TA15
- Near-alpha titanium
TA15 is a chemistry-led regional designation. International RFQs should include the full governing composition, revision, and acceptance limits rather than the shorthand alone.
Particle size and powder properties
- Standard cuts
- 15–53 µm · 45–105 µm
- Processes
- LPBF · EBM · DED
- Typical uses
- Elevated-temperature structures · Hot-side brackets · Aerospace development programs
| Property | Typical value | Note |
|---|---|---|
| D10 | ≥15 µm | — |
| D50 | 30–40 µm | — |
| D90 | ≤63 µm | — |
| Sphericity | ≥0.90 | Method to be confirmed |
| Apparent density | ≥2.4 g/cm³ | — |
| Tap density | ≥2.8 g/cm³ | — |
| Flow | ≤35 s/50 g | Method and conditioning to be confirmed |
LPBF screening window. Measured values are reported on the lot COA.
Chemical composition
| Ti | Al | Zr | Mo | V | Si | Fe | C | O | N | H |
|---|---|---|---|---|---|---|---|---|---|---|
| Balance | 5.5–7.1 | 1.5–2.5 | 0.5–2.0 | 0.8–2.5 | ≤0.15 | ≤0.25 | ≤0.08 | ≤0.12 | ≤0.03 | ≤0.015 |
wt.% · Typical partner-plant datasheet limits, wt.%. The quoted lot COA governs.
Typical mechanical properties
| Condition | Temperature | Tensile | Yield | Elongation |
|---|---|---|---|---|
| Heat treated | Room temperature | ≥1050 MPa | ≥950 MPa | ≥10% |
| Heat treated | 500 °C | ≥750 MPa | ≥600 MPa | ≥14% |
| Heat treated | 600 °C | ≥600 MPa | ≥400 MPa | ≥15% |
Partner-plant datasheet values for LPBF test bars at room temperature unless stated. Printed-part properties depend on machine, parameters, orientation, and post-processing.
Documents and packaging
Supplied with each lot
- Lot-specific COA
- Particle-size report
- Safety data sheet
- Chemistry report
Attach the governing TA15 chemistry or customer specification, plus the required interstitial and elevated-temperature test scope.
Packaging
- Aluminium-foil bag — very small quantities and paid samples
- 1 kg sealed pack — minimum standard package
- Drum — production lots
Samples are paid. The smallest standard pack is 1 kg.
Export
Export & compliance →Titanium and titanium-alloy powders can fall under China's dual-use export controls (list entry 1C111). If a TA15 Near-Alpha Titanium order is covered, it needs an export licence before shipment — samples included. The quotation states whether a licence is needed and what we need from you: end user, end use and destination. Read buying titanium powder from China for the licence steps and timing.
Price
List price · EXW China
On request
No reliable public list price was found for this grade. Your written quotation from our official corporate email confirms the price, lead time and terms for your quantity, particle size and documents.
Other titanium grades
| Powder | Particle size | Process |
|---|---|---|
| Ti6Al4V powder | 15–45 µm · 15–53 µm · 45–105 µm | LPBF · EBM · DED |
| Ti6Al4V ELI powder | 15–45 µm · 15–53 µm · 45–105 µm | LPBF · EBM |
| TA1 titanium powder | 15–45 µm · 15–53 µm · 45–105 µm | LPBF · EBM |
Technical notes
- TA15 Titanium Powder for High-Temperature Structural AM
- Buying Titanium Powder from China: Grades, Export & Lead Time
- DED Powder vs Wire: Feedstock Choice for Directed Energy Deposition
- Metal Powder for Rocket Injectors, Cryogenic Valves, and Feed Manifolds
- Ti6Al4V and TA15 MIM Powder: Specs, Interstitials & Sintered Data