TA1 titanium powder — supplier & RFQ
Commercially pure titanium powder, grade TA1 (GB/T 3620.1), for corrosion-led parts where ductility and chemical compatibility lead the decision.
- PSD15–45 µm · 15–53 µm · 45–105 µm
- ProcessLPBF · EBM
- List priceOn request
- Min. pack1 kg
- Grade
- CP Titanium · TA1
- Particle size
- 15–45 µm · 15–53 µm · 45–105 µm
- Processes
- LPBF · EBM
- List price
- On request
- Samples
- Paid · from 1 kg
- Packaging
- Aluminium-foil bag · 1 kg sealed pack · Drum
- Lot documents
- Lot-specific COA · Particle-size report · Safety data sheet · Interstitial chemistry report
TA1 titanium powder applications by industry
| Industry | Typical parts | Why TA1 titanium | Specify in your RFQ |
|---|---|---|---|
| Chemical processing | Heat-exchanger parts, valve bodies, manifolds in chloride service | Commercially pure titanium has excellent corrosion resistance where strength demand is moderate | Media and temperature, oxygen limit for the required ductility, pressure duty |
| Marine and desalination | Seawater pump and flow hardware, sensor housings | Seawater resistance with high ductility | Crevice geometry, galvanic couples, surface finish |
| Medical and dental (non-load-bearing) | Housings, instrument parts, dental components | Unalloyed titanium where alloying elements are unwanted | Applicable medical standard, cleaning route |
| Hydrogen and electrochemistry | Porous transport layers, electrolyzer components | Corrosion resistance in electrochemical cells | Porosity target, surface coating plan, purity |
Designations
- TA1
- CP-Ti TA1
- Commercially pure titanium
- GB/T 3620.1 TA1
This powder is TA1 commercially pure titanium to GB/T 3620.1. It is not ASTM Grade 2 (UNS R50400); the closest ASTM grade is Grade 1, but compare the oxygen, iron, carbon, nitrogen and hydrogen limits rather than assuming equivalence.
Particle size and powder properties
- Standard cuts
- 15–45 µm · 15–53 µm · 45–105 µm
- Processes
- LPBF · EBM
- Typical uses
- Chemical-service hardware · Corrosion-led components · Ductility-sensitive applications
| Property | Typical value | Note |
|---|---|---|
| D10 | ≥15 µm | — |
| D50 | 30–40 µm | — |
| D90 | ≤63 µm | — |
| Sphericity | ≥0.90 | Method to be confirmed |
| Apparent density | ≥2.4 g/cm³ | — |
| Tap density | ≥2.8 g/cm³ | — |
| Flow | ≤35 s/50 g | Method and conditioning to be confirmed |
LPBF screening window. Measured values are reported on the lot COA.
Chemical composition
| Ti | Fe | C | O | N | H |
|---|---|---|---|---|---|
| Balance | ≤0.25 | ≤0.10 | ≤0.15 | ≤0.03 | ≤0.015 |
wt.% · Typical partner-plant datasheet limits for CP titanium (TA1) powder, wt.%. The quoted lot COA governs.
Typical mechanical properties
| Condition | Temperature | Tensile | Yield | Elongation |
|---|---|---|---|---|
| Heat treated | Room temperature | ≥350 MPa | ≥250 MPa | ≥30% |
Partner-plant datasheet values for LPBF test bars at room temperature unless stated. Printed-part properties depend on machine, parameters, orientation, and post-processing.
Documents and packaging
Supplied with each lot
- Lot-specific COA
- Particle-size report
- Safety data sheet
- Interstitial chemistry report
State whether TA1 chemistry is acceptable or send the chemistry table you buy to, especially oxygen limits and any corrosion-service acceptance requirements.
Packaging
- Aluminium-foil bag — very small quantities and paid samples
- 1 kg sealed pack — minimum standard package
- Drum — production lots
Samples are paid. The smallest standard pack is 1 kg.
Export
Export & compliance →Titanium and titanium-alloy powders can fall under China's dual-use export controls (list entry 1C111). If a Titanium TA1 order is covered, it needs an export licence before shipment — samples included. The quotation states whether a licence is needed and what we need from you: end user, end use and destination. Read buying titanium powder from China for the licence steps and timing.
Price
List price · EXW China
On request
No reliable public list price was found for this grade. Your written quotation from our official corporate email confirms the price, lead time and terms for your quantity, particle size and documents.
Other titanium grades
| Powder | Particle size | Process |
|---|---|---|
| Ti6Al4V powder | 15–45 µm · 15–53 µm · 45–105 µm | LPBF · EBM · DED |
| Ti6Al4V ELI powder | 15–45 µm · 15–53 µm · 45–105 µm | LPBF · EBM |
| TA15 titanium powder | 15–53 µm · 45–105 µm | LPBF · EBM · DED |
Technical notes
- TA1 Commercially Pure Titanium (CP Ti) Powder for Additive Manufacturing
- Ti6Al4V vs CP titanium: strength or commercially pure titanium?
- How to Sample an AM Metal Powder Lot for Reliable PSD Results
- Powder Spreadability and Layer Density in LPBF: Buyer Specification Guide
- Metal Powder Flowability Tests for AM: Hall, Carney, and Rheology
- Titanium Powder for 3D Printing: Ti64, Grade 23, CP TA1, and TA15
- EBM Powder Size Guide for Titanium and High-Temperature AM Alloys
- Laser Diffraction vs Dynamic Image Analysis for AM Powder PSD